Pool Restoration & Renovation in Auckland
The Pool Savers restores and renovates tired swimming pools across Auckland - from a full repaint and resurface through to plaster repair, complete replastering and surface restoration. If your pool has moved past the point where a fresh coat of paint will fix it, a proper restoration brings the surface, watertightness and finish back to as-new.
Full Pool Restoration in Auckland, From Repaint to Replaster
Some pools need more than a recoat. Years of UV, chlorine and daily use roughen the surface, open cracks and let water get behind the finish. Once water sits behind the coating, a repaint alone will not hold - it lifts again within a season. A full pool restoration in Auckland fixes the surface at the source: we repair the substrate, cut out and patch cracks, address delamination, and replaster where the old finish has failed before any coating goes on.
Coordinating the whole job under one managed process is the difference. On most restoration projects the plastering trade and the coating crew are separate contractors, and the gap between them is where problems start - mismatched preparation, timing delays, and nobody owning the final result. The Pool Savers manages the plastering and coating as one coordinated project, so the surface the coating bonds to is prepared exactly the way the coating needs it, and we remain responsible for the process and the final result. Every restoration is finished with Rust-Oleum 9100 two-part epoxy, backed by our three-year workmanship warranty and three-year product guarantee - and plastered pool restorations carry a three-year workmanship warranty. Full detail on plaster repair and full replastering is on the pool plastering page.
Pool Surface Restoration and Replastering - The Complete Refinish
When a pool has genuinely deteriorated, coating alone is not the answer - the surface itself needs rebuilding. Pool surface restoration means stripping back the failed finish, repairing the shell, and applying a new plaster or mineral surface before the final coat. This is the work that separates a restoration business from a pool painter, and it is now core to what we do.
A full surface restoration suits pools where the plaster has blown, the substrate is rough and pitted across large areas, or previous coatings have failed repeatedly. Rather than paint over a failing surface, we replaster to give the pool a sound, smooth base, then finish with Rust-Oleum 9100 for a durable, watertight result. The outcome is an as-new surface - smoother underfoot, easier to clean, and built to last - without the cost or disruption of a full pool rebuild. Plastered pool restorations carry a three-year workmanship warranty; the Rust-Oleum 9100 coating system is backed by a three-year workmanship warranty and three-year product guarantee. We assess every pool first and recommend replastering only where the surface genuinely needs it, never as a default upsell.
Swimming Pool Renovation Auckland for Concrete and Plaster Pools
Our swimming pool renovation service in Auckland covers concrete and mineral plaster pools, and we also recoat and refinish fibreglass pool surfaces. Depending on the condition, a renovation might mean crack repair and a fresh Rust-Oleum 9100 coating, a full strip-back and replaster, or a combined replaster-and-recoat for a pool that has genuinely deteriorated. We assess the pool first, then recommend the smallest job that will deliver a lasting result - not the biggest.
For fibreglass pools, our work is surface coating and refinishing - preparing and recoating the surface for a fresh, durable finish - along with osmosis repairs where suitable. We do not take on major structural fibreglass rebuilding or gelcoat resprays; if that is what your pool needs, we will tell you at inspection.
Concrete Pool Restoration and Surface Repair
Concrete pool restoration is core work for us. We repair cracks, delamination and rough or pitted areas, prepare the surface correctly, and recoat with a two-part epoxy built for pool environments. Where the plaster underneath has failed, we replaster before coating so the new finish has a sound, smooth surface to bond to. More on concrete work is on the concrete pool painting page.
Pool Refurbishment and Revamp: What Your Auckland Pool Gains
A pool refurbishment is as much about how the pool performs as how it looks. A restored surface is smoother underfoot, easier to clean, holds water properly, and resists algae and staining. Every refurbishment is finished with Rust-Oleum 9100, backed by our three-year workmanship warranty and three-year product guarantee - and plastered pool restorations carry a three-year workmanship warranty.
Why Auckland Pool Owners Choose The Pool Savers for Restoration
Specialist pool surface team, not general painters
Preferred applicators of Rust-Oleum 9100 two-part epoxy
Plastering and coating coordinated and managed together under The Pool Savers, with full responsibility for the process and final result
Concrete and mineral plaster restoration, plus surface coating for fibreglass pools
Three-year workmanship warranty on plastered pool restorations; three-year workmanship warranty and three-year product guarantee on the Rust-Oleum 9100 coating system
Free, no-obligation pool inspection and quote
Frequently Asked Questions - Pool Restoration Auckland
-
It depends on the pool. A restoration can range from crack repair and a fresh coating through to a full replaster and recoat. We inspect the surface first and recommend the right scope - repairs, resurfacing, replastering, or a combination.
-
Usually, yes. Restoring the existing shell - repairing, replastering and recoating - avoids the cost of a full rebuild while giving you an as-new surface. We will tell you honestly if a pool is genuinely past restoring.
-
We do both. For pools that need more than paint, we strip back the failed surface, repair the shell and replaster or resurface before recoating - a complete pool surface restoration, not just a fresh coat. We recommend it only where the surface genuinely needs it.
-
We recoat and refinish fibreglass pool surfaces for a fresh, durable finish, and carry out osmosis repairs where suitable. We do not take on major structural fibreglass rebuilding or gelcoat resprays - we will confirm the right approach for your pool at inspection.
-
Timeframes depend on the size of the pool and the scope of work. Once we have inspected the pool we will give you a clear project window before any work starts.
Restore Your Pool With Auckland's Pool Surface Specialists
Book a free pool inspection and we will tell you exactly what your pool needs.
10 reasons to use The Pool Savers
-
Get a fast, accurate quote tailored to your pool type, environment, and usage.
-
We are preferred applicators for Rust-Oleum 9100, a high-performance, two-part expoxy coating designed for extreme durability.
-
Unlike painters who roll on thin coatings, we spray-apply a minimum of three coats creating a thick, even layer, reducing weak spots and extending the life of your pool surface.Description text goes here
-
Fibreglass pools can suffer from osmosis, where water seeps into the gelcoat, causing bubbles and structural damage. We properly prepare and seal the surface to prevent this process and the costly repairs associated.
-
Rust-Oleum 9100’s smooth, non-porous finish prevents algae, staining, and chemical buildup. Your pool stays cleaner with less scrubbing and fewer chemicals.Item description
-
Unlike some contractors who use general painters, we rely on our own specialised staff. ensuring a consistent, high-quality finish.
-
We back our work with an industry-leading three-year warranty for peace of mind.
-
New Zealand’s pools face intense UV exposure and heavy chemical use. Rust-Oleum 9100 is built to withstand sun, salt, and chlorine, keeping your pool looking new for years.
-
We’re local experts dedicated to high-performance pool coatings. With our experience, preferred Rust-Oleum status, and meticulous process, The Pool Savers is the right choice for pool resurfacing.
-
See some of our completed projects and happy pool owners [here].
